iP-8817 ISaGRAF PAC, 8-slot Controller with 80 MHz CPU and MiniOS7
8-slot ISaGRAF SoftLogic PAC with an 80186, 80 MHz CPU, MiniOS7 and four serial ports, supporting hot-swap I-87K high profile I/O modules.
- 80186 CPU at 80 MHz running MiniOS7
- Embedded ISaGRAF Ver.3 SoftLogic programmable to IEC 61131-3
- 8 hot-swap slots for high profile I-87K serial I/O modules
- 4 serial ports: 2 x RS-232, 1 x isolated RS-485 (3000 VDC), 1 x RS-232/RS-485
- 512 KB battery backup SRAM to retain data
- Modbus RTU/ASCII master, Modbus RTU slave, DCON and CAN/CANopen support
6 924,69 kr per st.
| 1–9 st. | 6 924,69 kr | |
|---|---|---|
| 10–30 st. | 6 725,26 kr | −3 % |
| 31+ st. | 6 581,22 kr | −5 % |
Produktinformation "iP-8817 ISaGRAF PAC, 8-slot Controller with 80 MHz CPU and MiniOS7"
iP-8817 CR is an 8-slot programmable automation controller that runs embedded ISaGRAF Ver.3 SoftLogic to IEC 61131-3 on an 80186 CPU clocked at 80 MHz under MiniOS7. It suits engineers who need PLC-style control logic with a rack of hot-swappable serial I/O modules in a single unit.
The eight slots accept high profile I-87K serial I/O modules, and the I-8K series is also listed as a supported I/O type. Four serial ports (two RS-232, one isolated RS-485 and one switchable RS-232/RS-485) let the controller talk to field devices, while RS-485 remote I/O modules from the I-7000 series and expansion units (RU-87Pn or I-87Kn) extend the system further.
Battery-backed SRAM retains data through power cycles, and the unit includes a 64-bit hardware serial number, a real-time clock, a watchdog timer and redundant power inputs. Note that ISaGRAF cannot run on 64-bit Windows 7 or 8 PCs; Win-GRAF is the suggested alternative for those systems.
Applications
- Industrial control using IEC 61131-3 logic in ISaGRAF
- Distributed I/O with RS-485 remote I/O modules (I-7000 series)
- Serial I/O expansion with I-87K modules via RU-87Pn or I-87Kn expansion units
| Product type: | PAC |
|---|---|
| Interface: | RS-232/RS-485 |
| Protocol: | Modbus RTU/ASCII |
| Ports: | 4 |
| Isolation: | 3000 VDC (RS-485 port) |
| Power input: | +10 ~ 30 VDC |
| Operating temperature: | -25 ~ +75 °C |
| Mounting: | DIN-rail, Wall |
Specifikationer
| Software | |
|---|---|
| OS | MiniOS7 |
| Protocol | • NET ID • Modbus RTU/ASCII Master • Modbus RTU Slave • DCON Protocol • User-defined Protocol • I/O Type: DCON, Modbus RTU remote I/O • FRnet I/O • SMS • CAN/CANopen |
| Development | Embedded ISaGRAF Ver.3 SoftLogic (IEC 61131-3) |
| CPU Module | |
| CPU | 80186 or compatible, 16-bit and 80 MHz |
| 64-bit Hardware Serial Number | Yes |
| EEPROM | 16 KB |
| Flash | 512 KB |
| NVRAM | 31 Bytes |
| SRAM | 512 KB SRAM, 512 KB Dual battery backup SRAM |
| Storage Expansion | Yes, but ISaGRAF does not support |
| Real Time Clock | Provide seconds, minutes, hours, dates, day of week, month, year |
| Watchdog Timer | Yes |
| Display | |
| Type | 5 x Digit 7 Segment LED Display |
| LED Indicators | |
| Status | 3 x Programmable |
| I/O Expansion | |
| I/O Type | I-8K, I-87K series |
| Slots | 8 |
| HMI | |
| DIP Switch | 8-bit for address |
| Push Button | 4 |
| COM Ports | |
| Ports | 2 x RS-232, 1 x RS-485 (3000 VDC Isolated), 1 x RS-232/RS-485 |
| Power | |
| Input Range | +10 ~ 30 VDC (1 kV Isolated ) |
| Consumption | 7.2 W |
| Mechanical | |
| Dimensions (mm) | 355 x 132 x 111 (W x L x H) |
| Installation | DIN-Rail, Wall mounting |
| Environment | |
| Operating Temperature | -25 ~ +75°C |
| Storage Temperature | -30 ~ +80°C |
| Humidity | 10 ~ 90 % RH, Non-condensing |
Specifikationer enligt tillverkaren. Ändringar förbehålls.
Nedladdningar
Logga in