ALM-Horn-RGB PoE Ethernet Alarm Siren with 8-LED RGB Beacon
PoE Ethernet alarm siren with a 100 ± 5 dB piezo sounder, 8 RGB LEDs, one digital input and one open-collector output, controlled over Modbus TCP and a built-in web server.
- 100 ± 5 dB piezo transducer siren at 10 cm / 3.0 KHz (without waterproof membrane)
- 8 user-definable RGB 3 colour Ultrabright LEDs under a water clear upper cover
- Four selectable alarm tones
- One digital input (dry contact, sink, NC/NO mode selectable, 3750 VDC isolation) and one open-collector output rated 400 mA
- PoE Ethernet (Class 3) via RJ-45 10/100 Base-Tx port
- Modbus TCP and Modbus UDP, HTTP, built-in web server
1 639,77 kr per st.
| 1–9 st. | 1 639,77 kr | |
|---|---|---|
| 10–30 st. | 1 595,45 kr | −3 % |
| 31+ st. | 1 562,21 kr | −5 % |
Produktinformation "ALM-Horn-RGB PoE Ethernet Alarm Siren with 8-LED RGB Beacon"
The ALM-Horn-RGB CR is a network-connected alarm siren and status beacon. A piezo transducer sounder is combined with 8 user-definable RGB 3 colour Ultrabright LEDs behind a water clear upper cover, so audible and visual alerts can be given from a single unit. It is powered over Ethernet and supports Modbus TCP, with a built-in web server included.
One digital input accepts dry contact signals from devices such as SA, BA or FA outputs, with NC/NO input mode selectable. A single open-collector output and four selectable alarm tones allow the unit to be matched to the alarm scheme in use. The Modbus interface makes it straightforward to integrate with SCADA software, HMI panels and utility systems for monitoring or control.
The housing carries an IP43 rating and the unit operates from -20 ~ +75 °C. It accepts a 12 ~ 48 VDC input range and can be installed on a panel or wall.
- Sounder rated at 100 ± 5 dB @10cm/3.0 KHz (without waterproof membrane)
- Piezo transducer siren with four selectable alarm tones
Applications
- Building Automation
- Security Automation
- Machine Automation
- Factory Automation
- Testing Equipment
- Fire Alarm System
| Product type: | Alarm siren |
|---|---|
| Interface: | Ethernet |
| Protocol: | Modbus TCP |
| Digital inputs: | 1 |
| Digital outputs: | 1 |
| Ports: | 1 |
| PoE: | Yes, Class 3 |
| Isolation: | 3750 VDC |
| Power input: | 12 ~ 48 VDC |
| Operating temperature: | -20 ~ +75 °C |
| Mounting: | Panel / Wall |
| Housing: | IP43 |
Specifikationer
| EMS Protection | |
|---|---|
| EFT (IEC 61000-4-4) | ±2 kV for Power |
| ESD (IEC 61000-4-2) | ±8 kV Air for Random Point |
| LED Indicators | |
| Status | System, Ethernet ACT, Ethernet PoE 3 LED's |
| Digital Input/Counter | |
| Channels | 1 |
| Type | Dry Contact: Sink |
| ON Voltage Level | Close to GND |
| OFF Voltage Level | Open |
| Isolation | 3750 VDC |
| Digital Output | |
| Channels | 1 |
| Type | Open Collector (Sink) |
| Load Voltage | +3.5 VDC ~ +30 VDC |
| Load Current | 400 mA |
| Alarm Output | |
| LED | Water clear upper cover with 8 RGB Ultrabright 3 color LED |
| LPiezo Transducer Pressure Level | 100 ± 5 dB @10cm/3.0 KHz (W/O waterproof membrane) |
| DIP Switch | |
| Mode | Restore to default (inside case) |
| Ethernet | |
| Ports | RJ-45, 10/100 Base-Tx |
| PoE | Yes, Class 3 |
| Access Control | Password and IP Filter |
| Protocol | Modbus TCP, Modbus UDP, HTTP |
| Power | |
| Reverse Polarity Protection | Yes |
| Input Range | 12 ~ 48 VDC with Reverse Protection (Vin to GND) |
| Consumption | 6.6 W (max) |
| Mechanical | |
| Dimensions (mm) | 119 x 119 x 48 (W x L x H) |
| Installation | Panel Mount/ Wall Mount |
| Ingress Protection Rating | IP43 |
| Environment | |
| Operating Temperature | -20 ~ +75°C |
Specifikationer enligt tillverkaren. Ändringar förbehålls.
Nedladdningar
Logga in