GW-7552-M PROFIBUS DP-V0 Slave to Modbus RTU/ASCII Gateway, Metal Case
Metal-cased PROFIBUS DP-V0 slave gateway that lets a PROFIBUS master access Modbus RTU/ASCII devices such as PLCs, sensors and M-7000 modules.
- PROFIBUS DP-V0 slave with automatically detected transmission rate and DIP-switch address from 0 to 126
- Modbus master or slave operation in RTU or ASCII format
- Hybrid COM 1 port selectable as RS-232, RS-422 or RS-485, with Self Tuner function
- Maximum input data length of 132 bytes and output data length of 131 bytes
- COM 1 supports 7 or 8 data bits, none, odd or even parity, and 1 or 2 stop bits
- High Speed iCoupler network isolation and 3000 VDC DC isolation on the PROFIBUS side
4 874,98 kr per st.
| 1–9 st. | 4 874,98 kr | |
|---|---|---|
| 10–30 st. | 4 719,87 kr | −3 % |
| 31+ st. | 4 631,23 kr | −5 % |
Produktinformation "GW-7552-M PROFIBUS DP-V0 Slave to Modbus RTU/ASCII Gateway, Metal Case"
The GW-7552-M CR bridges a PROFIBUS DP network and Modbus serial devices. It operates as a DP-V0 slave, so a PROFIBUS master can read and write data from Modbus equipment without changes to the field devices. Typical Modbus endpoints include PLCs, sensors and ICP DAS M-7000 series modules.
Configuration is carried out with the manufacturer's utility software. The PROFIBUS node address is set from 0 to 126 using a DIP switch, and the transmission rate is detected automatically. The serial side is a hybrid COM 1 port that can be set to RS-232, RS-422 or RS-485, and it supports Modbus Master or Slave operation in RTU or ASCII format.
The gateway uses high speed iCoupler isolation on the network side and provides 3000 VDC isolation on the PROFIBUS side. Its metal housing is mounted on a DIN rail and is rated for an operating range of -25 ~ +75℃, which suits panel-based installations in factory and process automation.
Applications
- Industrial automation
- Factory automation
- Process automation
| Product type: | Gateway |
|---|---|
| Interface: | RS-232/RS-422/RS-485 |
| Protocol: | PROFIBUS DP-V0 |
| Isolation: | 3000 VDC |
| Operating temperature: | -25 ~ +75℃ |
| Mounting: | DIN-rail |
| Housing: | Metal |
Specifikationer
| CPU Module | |
|---|---|
| CPU | 80186, 80 MHz or compatible |
| EEPROM | 16 KB |
| Flash | 512 KB |
| SRAM | 512 KB |
| Watchdog Timer | Watchdog IC CPU built-in |
| LED Indicators | |
| Status | PWR LED, RUN LED, ERR LED |
| COM Ports | |
| Ports | RS-232/RS-422/RS-485(can’t be used simultaneously) 3-pin screwed terminal block (RxD, TxD, GND) 4-pin screwed terminal block (RxD+, RxD-, TxD+, TxD-) 2-pin screwed terminal block (DATA+, DATA-) |
| Baud Rate | 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 |
| Parity | None, Even, Odd |
| Data Bit | 7, 8 |
| Stop Bit | 1, 2 |
| PROFIBUS | |
| Controller | Siemens SPC3 |
| Transceiver | ADI ADM2486 |
| Baud Rate | 9.6 k, 19.2 k, 45.45 k, 93.75 k, 187.5 k, 500 k, 1.5 M, 3 M, 6 M, 12 M |
| Isolation | 3000 VDC for DC-to-DC, 2500 Vrms for bus-to-logic |
| Protocol | DP-V0 |
| Power | |
| Consumption | 2.5 W |
| Mechanical | |
| Casing | Metal |
| Dimensions (mm) | 96 x 33 x 119 (W x L x H) |
| Installation | DIN-Rail |
| Environment | |
| Operating Temperature | -25 ~ +75℃ |
| Storage Temperature | -30 ~ +85 ℃ |
| Humidity | 5 ~ 95% RH, Non-condensing |
Specifikationer enligt tillverkaren. Ändringar förbehålls.
Nedladdningar
Logga in