PCI-P16POR16U Universal PCI Board, 16-ch Isolated DI and 16-ch Relay Output
Universal PCI board with 16 optically isolated digital inputs and 16 PhotoMOS relay outputs for switching, sensing and control in PC-based data acquisition systems.
- Universal PCI (3.3 V/5 V) interface with 16-bit data bus and PCI-Express x 1 type
- 16 optically isolated digital inputs with 5000 Vrms photo-isolation protection
- Selectable DC signal input filter and AC input with filter; sink/source operation
- 16 PhotoMOS relay outputs (Form A) with long life and no contact bounce or sparking
- Typical DI response of 50 kHz without filter; high-speed DI/O operation
- 4-bit onboard Card ID switch for identifying multiple cards in one computer
2 969,31 kr per st.
| 1–9 st. | 2 969,31 kr | |
|---|---|---|
| 10–30 st. | 2 880,67 kr | −3 % |
| 31+ st. | 2 814,19 kr | −5 % |
Produktinformation "PCI-P16POR16U Universal PCI Board, 16-ch Isolated DI and 16-ch Relay Output"
The PCI-P16POR16U is a universal PCI card, supporting 3.3 V and 5 V PCI bus slots, that combines 16 optically isolated digital inputs with 16 PhotoMOS relay outputs on a single board. The inputs accept AC or DC signals from 5 to 24 V, with selectable DC filtering, and are suited to sensing external voltages, switches and contact closures.
Isolation is the main reason to choose this card. The digital inputs provide 5000 Vrms photo-isolation protection, so field wiring can float relative to the host computer, which helps prevent ground loops and shields the PC from voltage spikes. The PhotoMOS relay outputs, rated at 300 V (AC peak or DC) and 130 mA, switch without mechanical contacts, so there is no contact bounce, sparking or acoustical noise, and they provide low leakage current when off.
A 4-bit onboard Card ID switch lets software identify the board when two or more cards are installed in the same computer. The card is described as a direct replacement for the PCI-P16POR16 and needs no software or driver changes. It is supplied with one CA-4037W cable and two CA-4002 D-Sub connectors and carries CE, UKCA, FCC, RoHS and WEEE certification.
Applications
- Controlling the ON/OFF state of external devices
- Driving external relays or small power switches
- Activating alarms
- Contact closure and switch sensing
- Sensing external voltages
| Product type: | DAQ board |
|---|---|
| Interface: | PCI-Express x 1 |
| Digital inputs: | 16 |
| Relay outputs: | 16 |
| Operating temperature: | 0 ~ +60°C |
Specifikationer
| Hardware | |
|---|---|
| Connector | Female DB37 x 1 40-pin box header x 1 |
| Card ID | Yes (4-bit) |
| Digital Input | |
| Channels | 16 |
| Type | Wet Contact Photocoupler |
| Sink/Source (NPN/PNP) | Sink/Source |
| ON Voltage Level | AC/DC 5 ~ 24 V (AC 50 ~ 1 kHz) |
| OFF Voltage Level | AC/DC 0 ~ 1 V |
| Response Speed | Without Filter: 50 kHz (Typical) With Filter: 0.455 kHz(Typical) |
| Trigger Mode | Static Update |
| Isolation | 2000 VDC |
| Relay Output | |
| Channels | 16 |
| Type | PhotoMos Relay (Form A) |
| Contact Rating | Load Voltage: 300 V (AC peak or DC) Load Current: 130 mA |
| Operate Time | 0.7 ms (typical) |
| Release Time | 0.05 ms (typical) |
| Electrical Endurance | Long Life and No Sparking |
| PC Bus | |
| Type | PCI-Express x 1 |
| Data Bus | 16-bit |
| Power | |
| Consumption | 600 mA @ +3.3 V 300 mA @ +12 V |
| Mechanical | |
| Dimensions (mm) | 113 x 118 x 22 (W x L x D) |
| Environment | |
| Operating Temperature | 0 ~ +60°C |
| Storage Temperature | -20 ~ +70°C |
| Humidity | 5 ~ 85% RH, Non-condensing |
Specifikationer enligt tillverkaren. Ändringar förbehålls.
Nedladdningar
Logga in