NS-206AFCS-60T Unmanaged Ethernet Switch, 4x RJ-45 + 2x SC Single-Mode Fibre
Unmanaged 4-port 10/100Base-TX Ethernet switch with two 100Base-FX single-mode SC fibre ports for links up to 60 km, plus redundant +12 to +48 VDC power inputs.
- Two 100Base-FX single-mode fibre ports with SC connectors plus four 10/100Base-TX RJ-45 ports
- Link distance up to 60 km (9/125 μm fibre recommended for full duplex)
- Redundant +12 ~ +48 VDC power inputs with reverse polarity protection
- Store and forward processing with a 2048-entry MAC table and 1 Mbit frame buffer memory
- IEEE 802.3x flow control and back pressure flow control
- Broadcast storm protection
4 642,31 kr per st.
| 1–9 st. | 4 642,31 kr | |
|---|---|---|
| 10–30 st. | 4 509,36 kr | −3 % |
| 31+ st. | 4 409,64 kr | −5 % |
Produktinformation "NS-206AFCS-60T Unmanaged Ethernet Switch, 4x RJ-45 + 2x SC Single-Mode Fibre"
The NS-206AFCS-60T CR is an unmanaged Ethernet switch that combines four 10/100Base-TX RJ-45 ports with two 100Base-FX single-mode fibre ports fitted with SC connectors. It suits engineers who need to extend an industrial Ethernet segment over a long fibre run while keeping the copper side simple to connect.
Fibre links are not affected by electrical noise, which helps keep communication stable in electrically busy plant environments. The single-mode fibre option supports a link distance of up to 60 km, with 9/125 μm fibre recommended for full duplex operation.
The switch accepts dual redundant +12 ~ +48 VDC inputs with reverse polarity protection, so it can run from common industrial DC supplies without an external converter. A relay alarm output and a -30 °C ~ +75 °C operating range complete a DIN-rail mounted unit suited to cabinet installation.
Applications
- Long-distance Ethernet links over single-mode fibre, up to 60 km
- Industrial Ethernet segments where electrical noise immunity is required
- Installations running from common 12 to 48 VDC industrial power supplies
| Product type: | Ethernet switch |
|---|---|
| Interface: | 2 x SC, 4 x RJ-45 |
| Relay outputs: | Yes (2 A @ 30 VDC) |
| Isolation: | 1500 Vrms |
| Power input: | +12 ~ +48 VDC |
| Operating temperature: | -30 ~ +75 °C |
| Mounting: | DIN-rail |
| Housing: | Plastic |
Specifikationer
| EMS Protection | |
|---|---|
| ESD (IEC 61000-4-2) | ± 4 kV Contact |
| LED Indicators | |
| Status | PWR1, PWR2, PWR_Fault, Link/Act, 10/100M |
| Ethernet | |
| Ports | 4 x RJ-45, 10/100Base-TX |
| Standards | IEEE 802.3, 802.3u, 802.3x |
| Processing Type | Store & forward |
| MAC Table | 2048 |
| Frame Buffer Memory | 1 Mbit |
| Flow Control | IEEE 802.3x flow control, back pressure flow control |
| Isolation | 1500 Vrms 1 minute |
| Fiber | |
| Ports | 2 x 100 Base-FX, SC connector |
| Mode | Single-Mode |
| Fiber Cable | 8.3/125, 8.7/125, 9/125 or 10/125 μm |
| Distance | 60 km, (9/125 μm recommended) for full duplex |
| Wavelength | 1300 or 1310nm |
| TX Output | -5 dBm Min. 0 dBm Max. |
| RX Sensitivity | -35 dBm |
| RX Overload | -5 dBm |
| Budget | 30 dBm |
| Power | |
| Reverse Polarity Protection | Yes |
| Input Range | +12 ~ +48 VDC (Redundant input) |
| Redundant Power Inputs | Yes |
| Consumption | 0.14 A @ 24 VDC |
| Alarm Output | Yes,Relay 2 A @ 30 VDC |
| Mechanical | |
| Casing | Plastic |
| Dimensions (mm) | 31 x 157 x 123 (W x L x H) |
| Installation | DIN-Rail Mounting |
| Environment | |
| Operating Temperature | -30 °C ~ +75 °C |
| Storage Temperature | -40 °C ~ +85 °C |
| Humidity | 10% ~ 90% RH, non-condensing |
Specifikationer enligt tillverkaren. Ändringar förbehålls.
Nedladdningar
Logga in