I-8811-G 8-Slot Serial Embedded Controller with MiniOS7, 80188-40 CPU
8-slot serial embedded controller for I-8K and I-87K I/O modules, running MiniOS7 with four serial COM ports (RS-232/RS-485) and -25 ~ +75 °C operation.
- 80188-40 CPU (8-bit, 40 MHz) running the MiniOS7 embedded OS, which boots in 0.4 ~ 0.8 seconds
- Eight slots for I-8K and I-87K I/O modules, covering DI, DO, DIO, AI, AO, counter/frequency and motion modules
- Four serial COM ports: 2 x RS-232, 1 x RS-485 and 1 x RS-232/RS-485
- S-256 (256 KBytes) or S-512 (512 KBytes) battery-backed SRAM for data logger storage
- Built-in watchdog timer and hardware diagnostic function
- 64-bit hardware serial number for software protection
4 742,03 kr per st.
| 1–9 st. | 4 742,03 kr | |
|---|---|---|
| 10–30 st. | 4 597,99 kr | −3 % |
| 31+ st. | 4 498,28 kr | −5 % |
Produktinformation "I-8811-G 8-Slot Serial Embedded Controller with MiniOS7, 80188-40 CPU"
The I-8811-G CR is an 8-slot embedded controller built around an 80188-40 CPU and the MiniOS7 DOS-like operating system. It accepts the full range of I-8K and I-87K I/O modules, including digital, analogue, counter/frequency and motion types, so one controller can be configured for a mixed I/O set in a single DIN-rail or wall-mounted unit.
Four serial COM ports (two RS-232, one RS-485 and one switchable RS-232/RS-485) make it suitable for remote data acquisition and control. Battery-backed S-256 or S-512 SRAM modules add data logging storage, and a built-in watchdog and hardware diagnostics help support unattended operation.
This gray-cover variant is rated for an operating range of -25 ~ +75 °C and runs from a +10 ~ 30 VDC supply. It is typically used for environmental monitoring, power management and factory automation.
Applications
- Remote data acquisition and control
- Environmental monitoring
- Power management
- Factory automation
| Product type: | PAC |
|---|---|
| Interface: | RS-232/RS-485 |
| Ports: | 4 |
| Power input: | +10 ~ 30 VDC |
| Operating temperature: | -25 ~ +75 °C |
| Mounting: | DIN-rail, Wall |
Specifikationer
| Software | |
|---|---|
| OS | MiniOS7 |
| Development | C Language |
| CPU Module | |
| CPU | 80188 or compatible, 8-bit and 40 MHz |
| 64-bit Hardware Serial Number | Yes |
| EEPROM | 2 KB |
| Flash | 512 KB |
| NVRAM | 31 Bytes |
| SRAM | 512 KB |
| Real Time Clock | Provide seconds, minutes, hours, dates, day of week, month, year |
| Watchdog Timer | Yes |
| Display | |
| Type | 5 x Digit 7 Segment LED Display |
| LED Indicators | |
| Status | 1 x Power, 3 x Programmable |
| I/O Expansion | |
| I/O Type | I-8K, I-87K series |
| Slots | 8 |
| HMI | |
| DIP Switch | 8-bit for address |
| Push Button | 4 |
| COM Ports | |
| Ports | 2 x RS-232, 1 x RS-485, 1 x RS-232/RS-485 |
| Power | |
| Input Range | +10 ~ 30 VDC |
| Consumption | 5.1 W |
| Mechanical | |
| Dimensions (mm) | 355 x 110 x 77 (W x L x H) |
| Installation | DIN-Rail, Wall mounting |
| Environment | |
| Operating Temperature | -25 ~ +75 °C |
| Storage Temperature | -30 ~ +85 °C |
| Humidity | 5 ~ 95 % RH, Non-condensing |
Specifikationer enligt tillverkaren. Ändringar förbehålls.
Nedladdningar
Logga in