Tillbehör
2AB125R is a DIP resistor of 125 ohm with a tight 0.1% tolerance and a 1/4 W power rating. Its metal film construction gives a temperature coefficient of 50 ppm/℃, which suits circuits where a stable, well-defined resistance value matters.Engineers typically choose this part when a precise fixed value is needed on a DIP-format board, and the RoHS certification is relevant where compliant components are specified.Resistance: 125 ohmTolerance: 0.1%Power rating: 1/4 WTemperature coefficient: 50 ppm/℃
Antenna Extension Cable, RG58A/U, RP-SMA Male to RP-SMA Female, 1M.
Antenna Extension Cable, RG58A/U, SMA Male to SMA Female, 1M.
Antenna Extension Cable, RG58A/U, RP-SMA Male to RP-SMA Female, 3M.
HDF 200 cable, 1 meter long N type male to RP-SMA male.
HDF 200 cable, 3 meter long N type male to RP-SMA male.
Antenna Extension Cable, RG58A/U, RP-SMA Male to RP-SMA Female, 5M.
HDF 200 cable, 5 meter long N type male to RP-SMA male.
Antenna Extension Cable, RG58A/U, SMA Male to SMA Female, 5M.
Antenna Extension Cable, RG58A/U, SMA Male to SMA Female, 10M.
Antenna Extension Cable, RG58A/U, RP-SMA Male to RP-SMA Female, 8M.
IP67 RJ45 Plug.
Cap with Tether.
IP67 Power Plug (5-pin).
IP67 Power Plug (3-pin).
AFAN-02 CR is a 1U two-way cooling fan module that keeps equipment within its temperature limits by providing active air movement. It accepts two fan modules, so a failed unit can be replaced while the system keeps running.Each fan has its own fault LED, and the relay alarm output signals a fan failure or loss of power. A failure in one fan does not affect the other, and a 5A fuse with overvoltage protection guards the 24 VDC supply.Relay alarm output reports fan failure or power loss to a remote monitoring systemMounted on a wall, the unit is suited to small server cabinetsApplicationsCooling for small server cabinets
The AFAN-04 CR is a 1U cooling fan module for rack-mounted computer room and industrial equipment. It houses four fans that provide active airflow, helping to lower the operating temperature of the equipment and maintain stable operation.Each fan has its own fault LED, and a relay alarm output signals any fan failure or loss of power to a remote monitoring system. Because a single fan failure does not affect the others, the module keeps cooling while a faulty unit is identified and replaced. The fans are hot-swappable, so maintenance can be carried out without shutting down the equipment.The module runs from 24 VDC with a 5A fuse for overvoltage protection and is sized for 19-inch racks. It is suited to engineers specifying thermal management for server rooms and control cabinets, where fan faults must be detected early to avoid overheating.ApplicationsCooling of computer room and server room equipmentThermal management of industrial equipment in 19-inch cabinetsFan fault monitoring with remote alarm signalling
The ANT-115-03-2 CR is a GPS/Glonass antenna with a magnetic mount base, designed to be fixed quickly to a metal surface and connected to a receiver through its 5 m cable. It covers the GPS band at 1575.42±5 MHz and the Glonass band at 1610±8 MHz, with a stated gain of 4.5 dBi.The antenna ends in an SMA male (plug) connector, so it suits equipment fitted with an SMA female socket. It is rated for an operating temperature of -40°C to +80°C and a storage temperature of -45°C to +85°C, and weighs 75 g.Compliance is stated as RoHS and WEEE. The CR suffix in the ordering code is the only variant indicator given, so check the ordering information before specifying this part.ApplicationsGPS and Glonass signal reception
ANT-124-03 is a 3 dBi omni-directional dipole antenna for 2.4 GHz wireless links. Its RP-SMA male plug connector suits equipment with an RP-SMA female socket, and its 2.4 to 2.5 GHz band coverage matches the 2.4 GHz range.The antenna measures φ13 x 136 mm and weighs 17 ± 2 g, so it can be mounted without adding significant bulk or load. It is rated for an operating temperature range of -30 °C to +85 °C, which suits installations exposed to wide ambient swings.Carries RoHS and WEEE certifications.ApplicationsOmni-directional 2.4 GHz wireless links
The ANT-124-05 is a 5 dBi omni-directional dipole antenna for 2.4 GHz wireless links. It terminates in an RP-SMA male plug, so it attaches directly to equipment with a matching reverse-polarity SMA socket.Why choose it: the antenna covers the 2.4 to 2.5 GHz band and is rated for an operating temperature of -30 °C to +85 °C, which suits outdoor-facing or enclosed installations where the wider temperature range matters.Dipole element, 5 dBi gainDimensions φ13 x 196 mm, weight 23 ± 2 gListed as RoHS and WEEE compliantApplications2.4 GHz wireless links on equipment with an RP-SMA socket
The ANT-15 CR is a 15 dBi omni-directional dipole antenna for 2.4 GHz wireless links. It is fitted with a 1 m cable terminated in an RP-SMA male plug, so it can be connected directly to a compatible wireless device with an RP-SMA female socket.Choose this model when you need 15 dBi gain across the 2.4 to 2.5 GHz band and a cable run of 1 m. The antenna body measures φ35 x 1600 mm and weighs 1050 g, and it is rated for an operating temperature of -20°C to 60°C.Supplied with RoHS and WEEE certificationApplications2.4 GHz wireless communication links
ANT-18 is an 18 dBi directional panel antenna covering 2.4 to 2.5 GHz. Its high gain and directional pattern concentrate radiated energy in one direction, which suits point-to-direction links where coverage is needed along a defined sector rather than in all directions.The antenna is fitted with a 1 m cable terminated in an RP-SMA male plug, allowing it to be connected to compatible 2.4 GHz radio equipment with an RP-SMA female socket. The body measures 270 mm x 205 mm x 15 mm (L x W x H), excluding the cable, and weighs 1000 g ±10 for the antenna body only.Rated for an operating temperature range of -20°C to 60°C, the ANT-18 is RoHS and WEEE certified.
The ANT-421-02 is a dipole antenna for GSM/GPRS wireless communication, fitted with an SMA male (plug) connector. It covers the 824 to 960 MHz and 1710 to 2170 MHz bands, so it suits designs that need to operate across both ranges from a single antenna.Gain is specified separately for each band: -0.9 ± 0.7 dBi at 890 MHz and +1.7 ± 0.7 dBi at 1930 MHz. The compact body measures φ13 x 136 mm and weighs 17 ± 2 g, which keeps it practical for installations where space and mass matter.Rated for an operating temperature of -30 °C to +85 °C, the antenna is RoHS and WEEE certified. Check the mounting and cabling requirements of your enclosure against the dimensions above before ordering.ApplicationsGSM/GPRS wireless communication