PoE-injektorer och splittrar

The NS-200PS CR is a Powered Device (PD) that takes a Power over Ethernet feed from a PSE and separates it into an Ethernet data connection and a 24 VDC power output. It lets a single cable to the cabinet supply both the network link and the power for a nearby device.Power is detected and classified automatically, and it is accepted from either the signal pairs or the unused pairs. The output is isolated and protected against short circuits, with a rated 10 W at 24 VDC (0.42 A). The slim plastic housing measures 33 x 107 x 78 mm (W x L x H) and mounts on a DIN rail.Rated for operating temperatures from -40 °C to +75 °C, the unit is certified to CE, UKCA, FCC, RoHS and WEEE. Specified standards are IEEE 802.3, 802.3u, 802.3x and 802.3af.ApplicationsPowering 24 VDC industrial devices over the Ethernet cableProviding an Ethernet connection and power to remote devices from a single PoE source

The tNS-200GIN CR is a single-port PoE injector for installations where a standard Ethernet link must also carry power to a remote device. It takes data from an RJ-45 input, passes it through to a PoE output and supplies up to 30 W on the spare pairs, so a compatible powered device needs only one cable.Power comes from a +48 VDC input with a specified range of +46 ~ +53 VDC, and reverse polarity protection is fitted. The unit detects powered devices automatically and monitors for over-temperature, over-current and over/under-voltage conditions. It is 100% IEEE 802.3at compliant and rated for an operating temperature of -40 °C ~ +75 °C.The plastic housing measures 52 x 86 x 27 mm (W x L x H) and mounts on a DIN rail, which suits control cabinets and industrial panels where space is limited.ApplicationsPowering PoE devices in industrial environmentsSingle-cable data and power delivery to remote Ethernet devices in control cabinets

The tNS-200GIN-24V CR sends data and power over one standard Ethernet cable to a PoE powered device with an RJ-45 port. It suits sites where a +48 VDC supply is not available, as it raises a +24 VDC input to PoE voltage for the powered device.Protection and monitoring are built in. The unit auto-detects powered devices and provides over-temperature, over-current and over/under-voltage detection, along with reverse polarity protection on the power input.The plastic casing measures 52 x 86 x 27 mm (W x L x H) and mounts on a DIN-rail. It is rated for an operating temperature of -40 °C ~ +75 °C and includes a Power and Power Device detection LED.ApplicationsPowering PoE devices in industrial environmentsInstallations without a +48 VDC power supplyDIN-rail mounted control cabinets

tNS-200IN CR is a single-port Power over Ethernet injector for feeding a PoE powered device over the same cable that carries its 10/100Base-T(X) data. Power is placed on the spare pairs, so the RJ-45 link to the device uses a standard Ethernet cable and the device needs no separate power wiring.The injector accepts a +46 ~ +53 VDC input and supplies up to 15.4 W to the powered device, with the output voltage following the power input. Automatic detection of powered devices, together with over-temperature, over-current and over/under-voltage detection, helps protect the connected equipment and the supply.The compact plastic housing measures 52 x 86 x 27 mm and mounts on a DIN rail. With an operating range of -40 °C ~ +75 °C, it suits cabinets and enclosures in industrial environments.ApplicationsPowering PoE powered devices in industrial environmentsSupplying data and power to a remote device over a single Ethernet cable

Single-port PoE injector for industrial sites without a +48 VDC supply. The tNS-200IN-24V adds power to an existing data link, so one standard Ethernet cable carries both signal and power to a PoE powered device with an RJ-45 port. It runs from a +18 ~ +32 VDC input and can supply up to 15.4 W.The unit detects connected powered devices automatically and monitors for over-temperature, over-current and over/under-voltage conditions. Its compact plastic housing is designed for DIN-rail mounting, and it is rated for an operating range of -40 °C ~ +75 °C.Suits 802.3af powered devices on spare pairsIdeal where a +48 VDC PoE supply is unavailableApplicationsPowering PoE powered devices in industrial environments from a +24 VDC supply where +48 VDC is not available